Carbon Fiber Manufacturing Processes

Manufacturing Processes

Technische Stärke

Litian Yunde develops and manufactures carbon fiber plates, tubes and custom-shaped components.

Our company introduction describes material cutting, lay-up or tube rolling, curing, demolding and subsequent machining as part of the manufacturing workflow.

The process depends on the part geometry, material specification and intended use. Discuss your drawings and project requirements with our team before selecting a manufacturing route.

Required tolerances, inspection methods, order quantities and delivery arrangements should be agreed for each project.

Discuss Your Project

Manufacturing Process Overview

Carbon Fiber Plates

Material preparation → Cutting → Lay-up → Thermal curing → Trimming → Machining

Carbon Fiber Tubes

Mandrel and material preparation → Mold setup → Rolling → Thermal curing → Demolding → Sanding → Painting → Machining

Custom-Shaped Components

Mandrel and material preparation → Lay-up → Mold setup → Thermal curing → Demolding → Sanding → Painting → Machining

The manufacturing route and finishing requirements depend on the component design. Discuss your drawing and project requirements.

01

Vorbereitung des Rohmaterials

Material preparation starts with the project specification. Confirm the required material and dimensions before production.

Discuss This Process
02

Lay-up

Lay-up and forming requirements depend on the component design and the agreed production route.

Discuss This Process
03

Einsetzen der Form

Lay-up and forming requirements depend on the component design and the agreed production route.

Discuss This Process
04

Warmpressen und Umformen

Forming and curing conditions depend on the selected material system and component geometry.

Discuss This Process
05

Entformen & Beschneiden

Die Produkte werden entformt und beschnitten, um überschüssiges Material zu entfernen und die Maßhaltigkeit zu gewährleisten.

Discuss This Process
06

Oberflächenveredelung

Schleifen, Streichen oder Klarlackieren verbessert die Optik und Haltbarkeit der Oberfläche.

Discuss This Process
07

Inspektion und Prüfung

Specify the dimensions and characteristics that need inspection when submitting your drawing.
Any required test method, standard or inspection report should be confirmed for the project.

Discuss This Process
08

CNC-Bearbeitung

Machining requirements for carbon fiber parts should be defined in the project drawing, including holes, edges and critical dimensions.

Confirm achievable tolerances and the inspection plan with our team before placing an order.

Discuss This Process
09

Aushärtung

Curing is part of the manufacturing workflow for plates, tubes and custom-shaped components. The method depends on the selected process.

Discuss This Process
10

Montage und Verpackung

Please state any assembly, packaging or transport requirements when requesting a quotation.

Discuss This Process